OBD BENZ SBC TOOL

W211/R230 ABS/SBC TOOL
(Repair Code C249F)

Mercedes Benz cars have W211 and R230 with ABS \ SBC system , if using DAS test, the instruction as follows:
TIPS：CODE C249F, OPERATION TIME OF COMPONENT A7/3 IS EXCEEDED (SBC HYDRAULIC UNIT)
The above tips that show internal fault of control unit, you have to replace the SBC control module and using W211/R230 TOOL that can be easily repaired without replace the new control module.
 
Mercedes Benz’s Safety Precautions had stated that before attempting to repair the brake system on
its models W211 (E Class) and R230 (SL Class), the Sensotronic Brake Control (SBC) system must be
deactivated first using its STAR-DIAGNOSIS tester.
Deactivation of the SBC system is absolutely necessary before carrying out any maintenance work on
the brakes like changing of pads, discs and fluids because the system is under a pressure of 140
bars. Mechanics who perform brake services on these car models must have the proper tools to avoid
the risk of injuries to themselves and damage to the brake system.
Until the introduction of this inexpensive, convenient, light, safe and easy to use SBC tool is
another alternative to the STAR-DIAGNOSIS tester when working on SBC system. It can perform the
tasks equally well which is efficient and safety.
After the repair had done, the SBC system can be activated and restore back its pressure. The
?Error? memory is erased automatically.
- Quick, easy operations with LED indications.
- Safe to use
- Power ON when plugged into vehicle?s OBDII diagnostic connector.
- Light, compact and very convenient.
- Stand alone unit.
This SBC tool works on Mercedes Benz W211 (E-Class) and R230 (SL-Class) with SBC systems.
It is ideally suited for:
- Brake centers
- Independent Mercedes Benz workshops
- Tire Service centers
- Service garages
- Quick service centers
- Mercedes Benz Specialist centers
- Automotive Repair Workshops
Product description:
1  directly through the OBD-11 repair SBC internal computer fault code C249F, no need to open ABS assembly, convenient and quick fix SBC completed within 10 seconds of data, a key to complete the operation.
2 SBC to repair the data first four models: 25% -50% -70% -100% user choice.
Support Type:
BOSCH NR: 0 265 960 012
BOSCH NR: 0 265 960 013
BOSCH NR: 0 265 960 015
BOSCH NR: 0 265 960 018
BOSCH NR: 0 265 960 019
BOSCH NR: 0 265 960 020
BOSCH NR: 0 265 960 023
BOSCH NR: 0 265 960 025
BOSCH NR: 0 265 960 028
Product Configuration:
1 Host: 1PCS
2 OBD-11 connector: 1PCS
3 Product Description CD: 1PCS

Lexia 3|Nissan consult 3|Benz Star|Renault CAN Clip|benz star 2000|Toyota tester|Fly 100 Honda|x431|VCM IDS|Auto Diagnostic|Automotive Diagnostic|VAS 5054A

AutoExpert 300 for All Honda Ford and Mazda

AutoExpert 300

— for all honda、ford and mazda

AutoExpert 300 equal VCM/IDS + GNA 600/ HDS/FLY 100

Reprogramming for all ford vehicles;

Reprogramming for all mazda vehicles; 

No password for all Honda key and smart key; 

Product Information:

AutoExpert 300 Software Version:

1. AutoExpert 300 software version for ford: IDS R68;

2. AutoExpert 300 software version for Honda: V2.021.008

AutoExpert 300 supports 29 languages：

1.Spanish	2. Slovenia	3. English	4. Greece
6. Danmark	5. German	7. Czechic	8.Chinese(Taiwan)
9.Chinese(China)	10. AmerEnglish	11. Vietnam	12. Turkey
13. Thailand	14. Swedish	15. Russian	16. Portuguese
17. Portuguese（Brazil）	18. Poland	19. Norwegian	20. Holand
21. Korea	22. Japanese	23. Italy	24. Indian
25. Hungary	26. French	27.French（Canada）	28. Finland
29.Spanish（Mexico）

 

AutoExpert 300 functions include:

1.	Scantool Diagnostics	All ford and mazda vehicles(Include all functions of original VCM/IDS); All Honda vehicles(Include all functions of original GNA 600 + Honda HDS+ FLY100 Full Version);
2.	Vehicle Reprogramming	All ford and mazda vehicles(Include all functions of original VCM/IDS); All Honda vehicles(Include all functions of original GNA 600 + Honda HDS+ FLY100 Full Version);
3.	Immobi and Smart key	All ford and mazda vehicles(Include all functions of original VCM/IDS); All Honda vehicles(Include all functions of original GNA 600 + Honda HDS+ FLY100 Full Version);

 

 

Hardware and software requirements:

1.PC or laptop with Windows XP (SP2 or later);

2.Hard disk drive with at least 400MB of free space;
3.DVD-ROM drive (if a high-speed Internet connection is not available);
4.USB2.0 required to connect PC to host ;
5.Monitor capable of displaying in VGA mode or above (1024 x 768 recommended);

Operation Notes:

1. AutoExpert 300 can only work for Windows XP(SP2 or later). It cannot work for VISTA;

AutoExpert 300 Kit Includes:

No. Item Name
1 AutoExpert 300 vehicle communication module 
2 OBD-16 Cable 
3 USB 2.0 Cable 
4 Power Supply 
5 One Box

LAUNCH X-431|Bmw GT1|diagnostic tool |auto diagnostic tools|Auto Testing Tools|Transponder Key|Alarms and Security|Auto Locksmith Tools|inpa k+can|xprog-m|upa usb|volvo vida dice

ELENC BeeProg Extremely fast Universal programmer USB

http://www.sinodownloads.com/down/download/ecutool/3515007.rar
Caution: Please don’t try to disassemble the machine.No warranty if the

machine is disassembled!
General information
1. 31728 supported devices by 2.38 version of SW (10. May. 2007)
extremely fast programming, one of the fastest programmers in this category.
2. Programs 16-Mbit Flash memory less than 18 seconds
3. 48-pins powerful pindrivers, no adapter required for any DIL devices
4. connector for in-circuit programming (ISP)
5. dual connection to PC: USB or parallel (printer) port
6. USB 2.0/1.1 compatible interface
7. alternatively high-speed IEEE 1284 (ECP/EPP) printer-port (LPT) interface x431 | Auto Diagnostic|Automotive Diagnostic|VAS 5054A|volvo vida dice|Lexia 3|Nissan consult 3|T300 key programmer|Benz Star

8. comfortable and easy to use control program, Windows 95/98/Me/NT/2000/XP/2003/XPx64 compatible
9. Multiprogramming possible by attaching more programmers to one PC
10. approved by CE laboratory to meet CE requirements
11. warranty – 3 years
Features
1. First member of new USB-compatible generation of Windows 95/98/ME/NT/2000/XP/2003/XP64 based ELNEC universal programmers
2. built to meet the strong demand of the developers community for the fast and reliable universal programmer.
3. Supports all kinds of types and silicon technologies of today and tomorrow programmable devices without family-specific module. You have freedom to choose the optimal device for your design.
4. Using built-in in-circuit serial programming (ISP) connector, the programmer is able to program ISP capable chips in circuit.
BeeProg isn’t only a programmer, but also a tester of TTL/CMOS logic ICs and memories. Furthermore, it allows generation of user-definable test pattern sequences.
5. Provides very competitive price coupled with excellent hardware design for reliable programming. Probably best “value for money”programmer in this class.
6. Very fast programming due to high-speed FPGA driven hardware and execution of time-critical routines inside of the programmer. At least fast than competitors in this category, for many chips much faster than most competitors. As a result, when used in production this one-socket-programmer waits for an operator, and not the other way round.
7. BeeProg interfaces with the IBM PC 486 compatible or higher, portable or desktop personal computers through USB (2.0/1.1) port or any standard parallel (printer) port. Programmer also supports IEEE1284 (ECP/EPP) high-speed parallel port.
8. Support of both USB/LPT port connection gives you the choice to connect the BeeProg programmer to any PC, from latest notebook to older desktop without USB port.
Specifications
Base unit, DACs
1. USB 2.0 port
2. FPGA based IEEE 1284 slave printer port, up to 1MB/s transfer rate
3. on-board intelligence: powerful microprocessor and FPGA based state machine
4. three D/A converters for VCCP, VPP1, and VPP2, controllable rise and fall time
5. VCCP range 0..8V/1A
6. VPP1, VPP2 range 0..26V/1A
7. autocalibration
8. selftest capability
9. protection against surge and ESD on power supply input, parallel port connection
ZIF socket, pindriver
1. 48-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 48-pin
2. pindrivers: 48 universal
3. VCCP/VPP1/VPP2 can be connected to each pin
4. perfect ground for each pin
5. FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins
6. analog pindriver output level selectable from 1.8 V up to 26V
current limitation, overcurrent shutdown, power failure shutdown
ESD protection on each pin of socket (IEC1000-4-2: 15kV air, 8kV contact)
7. continuity test: each pin is tested before every programming operation
ISP connector
1. 10-pin male type with missinsertion lock
2. 5 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from 1.8V up to 5V to handle all (low-voltage including) devices.
3. 1x VCCP voltage (range 2V..7V/100mA), can be applied to pins 1, 3
4. programmed chip voltage (VCCP) with both source/sink capability and voltage sense
5. 1x VPP voltage (range 2V..25V/50mA), can be applied to pins 2,3,4,6,8,10
6. target system supply voltage (range 2V..6V/250mA)
Packing List
1. BeeProg programmer
2. switching power adapter 100..240V AC/15V DC/1A
3. connection cable PC-programmer, LPT port
4. connection cable PC-programmer, USB port
5. ISP cable
6. diagnostic POD for selftest of the programmer
7. anti-dust cover for ZIF socket
8. user manual
9. software
10. registration card
11. calibration test report
12. transport case

Related Information:
http://estelle09.livejournal.com/
http://estelle.quebecblogue.com/
http://www.flixya.com/blog/Estelle
http://www.blogextremo.com/Complex/

Carter-ET Scanner

BMW Smart Key Programmer

BMW Smart Key Programmer

  

1. Support BMW (2002 -2009 years) CAS/CAS2/CAS3 DG512 / CAS3 + DP512.

2. Support matching BMW (2002 -2009 years) CAS/CAS2/CAS3 DG256 / CAS3 + DP512 key and remote control.

Bmw GT1
diagnostic tool
auto diagnostic tools
Programmer and Chips
Auto Testing Tools
Transponder Key
Tire Pressure Monitoring System
Original ICC IMMO Calculator
Alarms and Security
Car Ornaments
Auto Locksmith Tools
LAUNCH X-431
D-CAN Interface
inpa k+can
xprog-m
upa usb

sinosells, the best place for online shopping from China.

Please visit our website sinosells.com , for more details.

http://tester.kurdblogger.com
http://tester.bloginom.com/
http://tester.blogth.com/
http://tester09.centerblog.net
http://tester09.quebecblogue.com/
http://www.buzzfeed.com/tester09

sinosells, the best place for online shopping from China.

CarBrain C168 scanner is the first wireless automotive fault diagnostic scanner in China, C168 can be installed on most equipments that have Windows operating system, and it enormously enhances the compatibility between automobile examination and other automobile maintenance equipments. At the same time, using the wireless technology, the technician in his own office can examine the broke-down vehicle parked in the repair shop directly; and it solves the problem caused by space and distance effectively. C168 depends on its formidable function and practical technology obtains many attentions and praises from home and other foreign countries.

Vehicle List

Imported Vehicles

1. European Vehicle: Mercedes Benz, BMW, VW/AUDI, SEAT, SKODA, LANDROVER, CITROEN, 2. RENAULT, FIAT, VOLVO, PEUGEOT, OPEL

3. American Vehicle: CHRYSLER, FORD, GM, OBDII/EOBDII CAN/OBD INJECTION SYSTEM

4. Japanese Vehicle: TOYOTA/LEXUS, HONDA, MITSUBISHI, NISSAN, MAZDA, SUZUKI, DAIHATSU

5. Korean Vehicle: HYUNDAI, DAEWOO, KIA

Domestic Vehicles

1. Northeast of China: FAW-VW, FAW-HONGQI, FAW-MAZDA, FAW-JIABAO, HAFEI AUTO, SHENYANG JINBEI AUTO, FAW-ERFA, AOKESI AUTO, SG AUTO, GONOW AUTO, FAW-JIQING, CHINA-MOTOR, POLARSUN AUTO, DONGAN AUTO

2. North of China: Beijing Jeep, Beijing Hyundai, BAW, Great wall motor, Dadi Auto, FOTON, Huabei Motor, Heibao Motor, Huatai Auto, Qinhuangdao Motor, Shuanghuanuto, Tianma Auto, Tianye Auto, Tianjing Toyota, Tongbao Motor, Xinkai Auto, Beijing xingtiandi motor, Qingdao Estong, Beilv Auto, ZXauto

3. East of China: Shanghai GM, Shanghai VW, Chery, Soueast-motor, Jiangnan Alto, Changhe Auto, Changhe-Suzuki, Fuzhou Motor, Fuzhou Mazda, Shanghai Maple Automobile, Huayang Auto, IVECO, JAC, JMC, Geely, King-long, Landwind, Nanjing FIAT, SAIC Motor, Shanghai Wanfeng Auto, Soyat, Yangzi Vehicle, Dongfeng KIA, Yuejin Auto

4. South of China: Guangzhou Honda, Fudi motor, Wuling Motor, YCACO, Hainan Mazda, Jingan Clouded leopard, Baolong Motor

5. Midland of China: Dongfeng Citroen, DFAC light truck, Dongfeng Geugeot, Changfeng Liebao, Dongfeng Nissan, Hanjiang Motor, Dongfeng MPV, Wuhan Wantong, Dongfengxiaokang, Zhengzhou Nissan, Dongfeng CNG

6. Southwest & Northwest of China: Changan Vehicle, Chengdu New-dadi, Changan Suzuki, Xian Qinghua vehicle, Changan Ford, Xiefei Alto, BYD Auto, Hanjiang Auto

Function:

1. Read failure code

2. Clear failure code

3. Read channel data

4. Data stream preservation and contrast function

5. Component test and basic setting

6. Safe login and program

7. Maintenance records management

8. Automobile English-Chinese dictionary

9. Data stream waveform analysis

10. On-line software upgrade

11. Original wireless diagnosis function

12. Top diagnostic technology, can compare with original instruments

13. Full-range coverage of vehicle types in world

14. Free union of wired and wireless technology

15. Chinese and English language shift, easy operation

16. Compact size, excellent performance

17. Formidable function, quick response

18. Combination of auto diagnosis, records manager and maintenance help

19. Standard USB port

System:

1. Tire system

2. Door system

3. Engine system

4. SRS control module

5. ABS control system

6. Power control module

7. Air conditioner system

8. Theft-deterrent system

9. Instrument panel system

10. Automatical transmission

11. Power-Assisted steering system

NOTE: THE LAPTOP IS NOT INCLUDED FOR THIS PRICE.

Renault CAN Clip|FORD VCM IDS|VCM IDS|AD 900 key programmer|benz star 2000|Toyota tester|AK500 key programmer|Fly 100 Honda|x431|

Manufacturer Specifications

JP701 Japanese OBD2 OBDII ENGINE SCANNER CODE READER
Reads Engine, Transmission, ABS & Airbag Systems for major Japanese vehicles!
The MaxiDiag JP701 is an innovative multi-functional scan tool designed for technicians to troubleshoot engine, transmission, ABS & airbag systems for major Japanese vehicles. Reliable, easy-to-use & affordable, the MaxiDiag JP701 is a time saver & a money maker!
Global OBD2 – EOBD coverage.
Supports all 9 tst modes of the latest J-1979 OBD2 test specs.
 
Feature
Retrieves generic { PO, P2, P3 & UO} and manufacturer specific {P1, P3 & U1 } codes.
Displays DTC definitions on-screen.
Views FREEZE FRAME Data.
Displays O2 Sensor Data as well as LIVE Datastream parameters.
Data Graphing, 1996 and newer.
Reads stores and play back of LIVE Sensor data.
Memory/ Battery backup for off vehicle data review and analysis.
Performs Modules Present test.
Retrieves Vehicle Information. {VIN, CID & CVN }.
Supports all current OBD2 Protocols, including CAN { Controller Area Network }.
Easy and reliable to use.
Built in DTC look-up Library.
Prints data via PC.

sinosells, the best place for online shopping from China.

Auto Diagnostic|VCM IDS|Automotive Diagnostic|VAS 5054A|volvo vida dice|Lexia 3|Nissan consult 3 |T300 key programmer|Benz Star|FORD VCM IDS

With the steel material Katakado knife (oblique knife), slot blade (straight blade).
Calibration depth scale is clear and is easy for calibration.
Butterfly screws are Peilin device, strong forcing degree, flexible operation.
High accuracy, save hours of work and increase efficiency.
The left seat group

Widening the distance between four fixtures can make the 120mm key and all kinds of double-sided keys for needs.
The new fixtures are set perpendicular to enhance the copy work accuracy.
The new design of the four fixtures will be better to ensure accuracy when copy the keys.
Associate with the adjustable seat in the tool to protect screws, cutting tools and fixtures to prevent damage to each other.
The right seat group
Up and down two fixture can be directly copied long 110mm keys & special keys do not have any attachments. Such as: 4 square keys (SOLO) large and small keys, semi-circular keys (ABLOY) left and right keys to open, handle lock and till locks. * Specially designed 90-degree balancing screws, locking when fixture to allow for vertical cutting, release time can be used for semi-circular, square keys arc cutting.

Specification
Motor

Width 450cm
Singel phase

Length 320cm
1/4Hp

Hight 220cm
Speed：1720

Net weight 25kg
110V or 220V

Grand weight 27kg
50MHz/60MHz

Meteril 3.2

The left seat drive by the twist roll, the right drive by hands

sinosells, the best place for online shopping from China.

Renault CAN Clip|FORD VCM IDS|VCM IDS|AD 900 key programmer|benz star 2000|Toyota tester|AK500 key programmer|Fly 100 Honda|x431

Automotive Diagnostic Tools & Equipment

sinosells, the best place for online shopping from China.
sinosells selling big brands of auto parts: auto auto diagnostic tool, ECU Tools, Locksmith Tools, Auto Accessories, Digital Products, odometer correction, diagnostic scanner, auto scanner, immo code reader, airbag reset, transponder key, key blank.
Come in need of assistance Website: www.sinosells.com
sionsells “faith-based, customer first, service first”, sinosells price will be more robust steps, boarded the update stage.

Renault CAN Clip|FORD VCM IDS|VCM IDS|AD 900 key programmer|benz star 2000|Toyota tester|AK500 key programmer|Fly 100 Honda|x431